D28 Single-Layer Fiber Laser Nozzle M11, 1.0–4.0 mm — fits Raytools BM109/110/111, Hans D28-E-SP-class heads
D28-SPS Single Nozzle · LP-N06 · from $2.79 each in a 10-pack
Representative image. You receive the exact size and spec in the listing.
In stock · ships from the USALP-N06
$27.90
$2.79 each in a 10-pack
Same price for every orifice we list.
- Apple Pay
- Google Pay
- Visa
- Mastercard
- American Express
- LinkLink
You pay on the secure Stripe page. Apple Pay and Google Pay show on supported devices. Promo codes go there too.
Reorder reminder
Send this SKU to your inbox so the next box is a forward, not a search.
Fitment
- Compatible heads (noted): Hans D28-E-SP
- Compatible heads (typical): Raytools BM109 / Raytools BM110 / Raytools BM111
Body Ø D28 · Thread M11 · Height H15 · Layer single
Compatible consumable — not an OEM Raytools / Hans part.
Check it in Find by headNot sure? Send us a photoNeed a whole head? Get a delivered quote.
D28-SPS Single Nozzle is a copper fiber-laser cutting nozzle. Single layer means one orifice. Shops usually run single-layer nozzles on nitrogen or air for stainless and aluminum. On our spec sheet: 28 mm outside diameter, M11 thread, 15 mm height. Orifice size is chosen in millimeters and does not change the price. Sold in packs of 10 or 50. Compatible consumable, not an OEM part. SPS single body, 15 mm tall, M11.
When to use
Single-layer: Nitrogen or air assist · stainless, aluminum, non-ferrous
A habit, not a cut chart — single vs double layer.
Key facts
- Copper nozzle, D28 body, M11, H15
- Orifice options: 1 / 1.2 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 mm
- Seats on a D28 M11 ceramic ring
- Sold in 10 / 50 packs
- Ships from the USA
- Compatible aftermarket part, not OEM — confirm fit on first order
Specifications
| SKU / MPN | LP-N06 |
|---|---|
| Pack sizes | 10 (LP-N06-Q10) · 50 (LP-N06-Q50) |
| Type | Nozzle |
| Body Ø | 28 mm |
| Height | 15 mm |
| Thread | M11 |
| Layer | single |
| Orifice | 1 mm, 1.2 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm |
| Material | Copper |
| Finish | Not stated |
Head fit details
| Head | Confidence | Note |
|---|---|---|
| Raytools BM109 | typical | D28 nozzles are the usual consumable on BM109-class heads. Confirm thread and height on the first order. |
| Raytools BM110 | typical | Common D28 fit. Confirm thread and height on the first order. |
| Raytools BM111 | typical | Common D28 fit. Confirm thread and height on the first order. |
| Hans D28-E-SP | noted | A reference photo of this model is marked HANS D28-E-SP S. Treat that as a likely fit until it is confirmed on your head. |
- Listed fit — the head is named on our spec sheet.
- Noted fit — a photo or remark calls it out. Confirm the exact model.
- Typical fit — common for this diameter. Confirm before the first order.
Often ordered with
The ceramic matches this nozzle's body Ø and thread. The 24.9 × 1.5 mm window is a common seat size on D28-class heads, not a confirmed fit for every machine — match the window you pull out.
In stockShips from the USA
Ceramic ring · LP-C01
D28 M11 Ceramic Ring
D28 · M11
$54.90 / 10-pack · $5.49 each
In stockShips from the USA
Protective window · LP-W01
Protective Window 24.9 × 1.5 mm, 4 kW
D24.9 · 4 kW · 1.5 mm thick
$41.60 / 10-pack · $4.16 each
In stockShips from the USA
Protective window · LP-W02
Protective Window 24.9 × 1.5 mm, 20 kW
D24.9 · 20 kW · 1.5 mm thick
$58.60 / 10-pack · $5.86 each
Questions
- Do I need to re-center after swapping the nozzle?
- Yes. Center the nozzle on the beam after every swap — a tape shot or your head's centering routine. An off-center nozzle shows up as dross or slag on one side of the cut.
- Chrome or plain copper?
- Plating is not stated on our spec sheet for this SKU. Treat it as plain copper unless the bag says otherwise.
- What if it does not fit my head?
- Email support@laserparts.us with the head model and a photo before you ship anything back. A listed fit that does not seat is replaced or refunded. Unused parts in sealed packs can come back within 30 days of delivery. Typical and noted fits are confirm-first.
- How do I reorder the same part?
- Order the pack SKU (LP-N06-Q10, LP-N06-Q50) and the same orifice. SKUs stay the same between orders, and the JSON catalog lists every one.
Bought D28-SPS Single Nozzle? Write a review
We publish a review only after it matches a real order.
More nozzles
In stockShips from the USA
Nozzle · LP-N01
D28 Standard Single Nozzle
D28 · single
$21.90 / 10-pack · $2.19 each
In stockShips from the USA
Nozzle · LP-N03
D28-C-15-S High-Speed Single Nozzle
D28 · single · M11
$24.90 / 10-pack · $2.49 each
In stockShips from the USA
Nozzle · LP-N02
D28 Standard Double Nozzle
D28 · double
$24.90 / 10-pack · $2.49 each
In stockShips from the USA
Nozzle · LP-N04
D28-C-15-D High-Speed Double Nozzle
D28 · double
$25.90 / 10-pack · $2.59 each